What are the advantages of uvled curing light source? Where is the best UVLED curing light source?read count [370] release time：2021-07-23 09:26:00
uvled What are the advantages of curing light sources? uv led Where is the best curing light source? since uvled The curing light source has entered uv After the solidification industry, many manufacturers gradually began to use uvled The curing light source replaces the traditional curing mercury lamp. Why do you say that? Because it has many more advantages than traditional mercury lamps.
1.Long equipment life: Traditional mercury curing lamps usually have a service life of1000-3000Within hours, after which the lamp needs to be replaced. and uvled Curing light source has long service life20000More than hours, much longer service life than mercury lamps.
2.More convenient operation: traditional mercury lamps need to be preheated before use. uv The energy required to solidify a material. and uvled The curing light source is ready to use, reaches the set power instantly, and can be started and stopped at any time, greatly improving production efficiency and making the operation simpler and more convenient.
3.Thermal radiation: In addition to producing ultraviolet light, traditional mercury lamps also produce infrared light during operation. Infrared light will heat up the surface of the object being illuminated. The mercury lamp can increase the temperature of the surface of the product being illuminated. 60-90°C，This is quite a fatal temperature for some heat-sensitive substrates. and uvled The characteristic of the curing light source is that the wavelength band is stable and does not mix with the infrared band. The temperature of the irradiated surface increases within5°C left and right, with a wider scope of application.
4.Light intensity: uvled The curing light source uses high power led The chip and special optical design enable ultraviolet light to achieve high-precision, high-intensity irradiation, and the irradiation area can be customized according to actual usage, and the illumination intensity error between the irradiation center and edge does not exceed5%, so that the product is evenly irradiated. The mercury lamp has strong center energy but low edge energy.
5.Green and environmentally friendly: Traditional mercury lamps contain mercury, but mercury lamps have a short service life and need to be replaced frequently. They produce a large amount of waste products, and the processing and transportation of these waste products are troublesome. Ozone is also produced during the use of mercury lamps. and uvled The curing light source uses semiconductor light, which does not cause pollution to the environment and is more environmentally friendly.
6.Low energy consumption: uvled The curing light source not only has a higher effective luminous rate than mercury lamps10More than times, and whether the mercury lamp is effectively irradiating or not, it needs to be continuously lit and will always be in a power-consuming state. and uvled The curing light source is ready to use and can be turned off immediately and enter standby after use, greatly reducing energy consumption.
To sum up, everyone knows uvled What are the advantages of curing light sources? uvled Where is the curing light source? with various advantages uvled Curing light sources are still developing continuously, and coupled with the country’s comprehensive ban on mercury, it can be said that uvled It is only a matter of time before curing light sources replace traditional mercury lamps.
