The UVLED point light source curing market will usher in a big explosion!read count [309] release time：2020-01-13 20:20:00
why say uvled point light source The curing market will usher in a big explosion. First we should understand uv led Why is point light source more and more widely used in the current curing market? It has advantages that traditional light sources do not have, such as any improvements in the curing principle, the life of the light source, the wide range of applications, etc.
1. What are the advantages compared with traditional lighting systems?
1、Reduce energy consumption by 70%-80%；
2. LED-UV lamp has long life: less frequent replacement；
3. Do not use infrared rays: Prevent thermal shrinkage of printed matter；
4、LED-UV light source can be switched on and off instantly, saving preparation time；
5、Space-saving design: control systems, cooling units and other equipment are designed to minimize space；
6. No ozone is generated: The system does not require the installation of deodorization devices, exhaust systems or similar devices, so the device can even be installed in densely populated areas, using the LED-UV printing system to have a clean printing environment.
2. What are the advantages compared with traditional printing?
1, Instant drying means no residue: this allows finished prints to be stacked directly on the shelf.
2. Instant drying means no need to spray powder: there is no need to worry about powder adhering to the surface of the printed matter, and the working environment is very clean.
3. Instant drying means time saving: the printed product can be immediately moved to the next step, such as cutting or binding.； And can print on non-absorbent materials, synthetic papers, or metallized papers. In addition, since there is no need for separate drying, the space required for drying is also saved.
To sum up, of course this is only part of the reason. We know that it is an inevitable trend for the uvled point light source curing market to usher in a big explosion. Yongcheng Optoelectronics has seized the opportunity and entered relatively early. Therefore, our company's curing products are considered to be relatively good in all aspects in the industry.
